Example Reports
Below is a selection of the type of work undertaken for the automotive
& aerospace Industries.
| CSMA Report Titles relating to Automotive & Aerospace Industries |
- Analysis of Wax Vapours By GCMS Analysis
-
XPS Analysis of Aluminium-Coated Foil Samples
-
XPS Analysis of Brown Staining on a Tungsten Carbide-Cobalt Ring
-
XPS Analysis of Gold Foil Samples.
-
XPS Analysis of Ceramic Fabric and Gold Foil Samples
-
XPS Analysis of Ceramic Fabric and Aluminium Foil Samples
-
XPS Analysis of Ceramic Fabric Samples.
-
Analysis of Titanium Blades
-
DSIMS Analysis of Four Bearing Samples
-
Investigation of Top-Coat Preparation to Assess Potential for
Silicone Contamination
-
XRD Analysis of Sample Foil
-
ToF-SIMS analysis of a Surface 'Bloom' on a Coated Aircraft Canopy
-
SIMS Analysis of Inclusions in Multi-layer Coating on Acrylic
Canopy
-
Surface Characterisation of Sputter-Coated Sapphire Windows using
ToF-SIMS
-
DSIMS Analysis of One Bearing Section
-
Determination of the Cause of Failure of HfOX/SiOX Multilayer
Coatings
-
DSIMS analysis of Two Bearing Samples
-
Investigation into the Cause of Paint Delamination Failure of
Interior Instrument Panels using Surface Analysis.
-
ToF-SIMS Investigation into the Cause of the Haziness within an
Acrylic Laminate Screen.
-
Investigation of the Interfacial Failure on a Coated Acrylic Sheet
using XPS and ToF-SIMS
-
An Investigation into the Interfacial Failure of a Coating from
the Edge of a Trial Aircraft Canopy using ToF-SIMS
-
Comparative Analyses of the Coatings on Two Acrylic Aircraft Windscreens
using ToF-SIMS and FT-IR
-
Further Investigation into the Cause of a Hazy Finish on Polished
PMMA by ToF-SIMS and AFM
-
An XPS Investigation into the Cause of a Hazy Finish on Polished
PMMA.
-
Investigation into the Cause of Interfacial Failure on Multi-layered
Glass Structures using Angle Dependent XPS
-
Investigation into the Cause of Interfacial Failure on Multi-layered
Glass Window Structures Using Time of Flight SIMS.
-
Investigation into Coating Failure on Windscreen Glass using ToF-SIMS
-
Analysis of an Automotive Paint Crater by ToFSIMS
-
Surface Analysis of Paint Crater Specimens using Small Spot XPS
-
XPS Studies of the Effects of Rare Earth Surface Oxide Modification
Treatments on Aluminium Alloy.
-
A LIMA study of corroded solder connections on an aircraft flap
controller board.
-
Analysis of Craters in Automotive Coatings by ToF-SIMS
-
An Investigation into Coating Failure on an Engine Cylinder Bore
using X-ray Photoelectron Spectroscopy.
-
A Surface Analysis Study into the Variable Adhesion of Metal Shims
to Painted back Plates of Brake Pads.
-
XPS and ToF-SIMS investigation of rotor blade shield strap disbondment.
-
An XPS investigation of staining on the backs of two steel bearings
-
LIMA/AES analysis of brake pad compounds.
-
An XPS investigation of paint failure on two automotive finishers
-
An Investigation into Delamination of Foam from ABS backing, for
Car Fascias, using XPS and ToF-SIMS
-
Determination of the Alloy Composition
-
Determination of the Purity of a Series of Production Solutions
and Solids
-
Further XPS studies of transfer films in brake rotor / pad systems
-
XPS studies of wear on Pb loaded PTFE bushes corresponding to
bearing shafts
-
To Determine the Cause of Disbondment of a Coating System on a
Car Panel using X-ray Photoelectron Spectroscopy (XPS).
-
XPS analysis of powder paint coating failure on automotive window
frame rails.
-
An XPS investigation of the transfer films in two brake rotor
/ pad systems exhibiting different wear rates
-
Analysis of Bulk Composition of Particulate Extract from "Speedfan"
Machine by Energy Dispersive X-ray Analysis (EDAX)
-
XPS studies of coating failure on visors
-
Determination of the surface chemistry of three dysprosium fluoride
powders using XPS
-
Determination of the Purity of Three Dysprosium Fluoride Samples
by GDMS
-
XPS analysis of Metal - Elastomer interfaces after water bomb
tests
-
Analysis of coating delamination from a polycarbonate visor using
X-ray photoelectron spectroscopy (XPS)
-
Determination of the Purity of Two Dysprosium Fluoride Samples
by GDMS
-
To Determine the Cause of Adhesion Failure Between the Clearcoat
and Basecoat of a Car Bumper Section using XPS and ToF SIMS.
-
XPS analysis of seal failure on bus windows
-
A study of the adhesion of gasket to metal substrates, of different
surface preparations, using X-ray photoelectron spectroscopy (XPS)
-
Investigation into paint failure on car bumpers using ToF SIMS
-
Analysis of coated polycarbonate surfaces using ToF SIMS
-
To characterise the surfaces of steel coupons after various treatments,
using X-ray Photoelectron Spectroscopy (XPS)
-
XPS investigation of locus of failure of red paint on primed steel
panels
-
An XPS analysis of orange-brown spots in car paint scrapings.
-
XPS study of printed circuit board corrosion failure
-
An XPS study of transfer films from the hot and cold areas of
four cast iron rotors
-
A LIMA study of automotive paint contamination.
-
Analysis of cracking failure, deposits and staining on a plastic
moulding using X-ray photoelectron spectroscopy (XPS)
-
An XPS study of a second set of areas on noisy and quiet brake
disc / pad pairs
-
A combined XPS / LIMA study of an E/Coat defect following paint
removal
-
An XPS study of an E/Coat defect on a car body panel piece
-
A comparative XPS study of transfer films on noisy and quiet brake
disc / pad pairs
-
Surface Analysis of automotive paint craters by ToF SIMS
-
Investigation of disbondment of elastomer seal from a steel gasket
using XPS
-
Investigation into elastomer disbondment from a steel gasket using
ToF SIMS
-
Investigation into Paint Failure on Tractor Panels using ToF SIMS
-
Coating thickness measurements on tractor panels using optical
microscopy
-
Analysis of coating failure on tractor panels using XPS
-
Analysis of the composition and distribution of transfer films
on rotor samples using ToF SIMS
-
Surface analysis of automotive paint craters using XPS
-
Analysis of pre-treatment faults on tractor panels using XPS
-
Further investigation of automotive paint craters by Time of Flight
SIMS
-
ToFSIMS Investigation of Paint Delamination
-
Comparative Surface Analysis of Three Primer Samples using XPS
and ToFSIMS
-
XRF Analysis of Barytes Powder
-
Metallographic Examination of Cam Followers
-
Investigation of Cratering Problem on a Coated Panel by GCMS,
XPS and ToFSIMS
-
Investigation into Deposit Formation on a Windscreen
-
Analysis of Barytes and Painted Surfaces
-
Characterisation of a Substitution Indicator and a Coating (on
the Flexible Metal Strip) of a Car Windscreen Wiper
-
Surface Characterisation of a Treated Alloy for Cleanliness Validation
-
Investigation of Blistering on a Paint Coating using XPS and ToFSIMS
-
Investigation into Splitting of a PVC Plastisol Sealant Bead
-
XPS Analysis of Discolouration on Yttria Stabilised Zirconia.
-
XPS Analysis of Plasma Treated Titanium Alloy Plates.
-
Investigation of a Blistering Problem in the Coating of a Car
Door
-
ToFSIMS & SEM/EDX Analysis of Paint Defects
-
Investigation into Paint Defects on Painted Car Body Panels.
-
Investigation into the Cause of Rubber Sheet Sticking to the Cast
Iron Mill Rollers.
-
Investigation into Cause of Corrosion on Galvanised Car Door Panel
Seals
-
Hardness Profile Measurement on a Motor Cycle Cam Shaft
-
Analysis of Corroded Condenser Components
-
Characterisation of Plasma Nitrided Stainless Steel Surfaces
-
Further Investigation of “White Spot” Features on
Car Body Panels.
-
Analysis of Diesel Engine Cams and Followers
-
Investigation of White Corrosion Spot Areas on Galvanised Metal
Panels.
-
Analysis of Steel Surfaces from Friction Tests Performed at Different
Temperatures
-
XRD and XRF of Alumina Samples
-
Surface Analysis of Steel Related to a Phosphating Problem
-
X-Ray Diffraction of Alumina
-
Analysis of Two Gear Teeth Sections
-
DSIMS Analysis of Cam Followers
-
Investigation into Paint Delamination on an Automotive Bumper
using ToF-SIMS & XPS
-
Investigation of Print Transfer/Migration on a Laminate by Optical
Microscopy
-
Investigation into Pitting of Motorcycle Gear Teeth.
-
Investigation into Delamination of the Paint Layer from a Tractor
Body Panel.
-
Characterisation of the NiSn Intermetallic Phase on a Bearing
Cross-section.
-
DSIMS Analysis of Cam Followers
-
ToF-SIMS Analysis of Lubricant Residues on Gear Teeth
-
Analysis of PVC Plasticol with Thixotropic Properties
-
DSIMS Analysis of Gear Teeth Sections
-
A Multi-technique Investigation of Brake Pipe Corrosion.
-
FTIR , SEM/EDX and Optical Microscopy Analysis of Defects in Foam
Products
-
SIMS Analysis of a Cam Follower
-
Analysis of the Wear Region of a Cam Follower using Imaging and
Depth Profiling SIMS
-
Characterisation of PVC Plastisol Samples using Surface Analysis
Techniques
-
SIMS Analysis of Bearing Sections
-
An XPS Study of PTFE/PPS Composite Transfer Films on Mild Steel
Shafts
-
Characterisation of a Ceramic Exhaust Gas Trap using Surface Area
Measurement Techniques
-
ToF-SIMS Analysis of Contaminated Boards
-
DSIMS Analysis of Bearing Sections
-
Investigation of a Zinc Based Body Panel Coating
-
Solderability Testing of capacitors
-
DSIMS Analysis of Bearing Sections
-
Solderability Testing on Copper and Alloy 42 Pins
-
Investigation of a Black Deposit on Circuit Board Connector Pins
-
DSIMS Analysis of Four Bearing Samples
-
XRD Analysis of Sample Foil
-
Further Analysis of Wire Bonding Problems in Engine Management
Modules.
-
SIMS imaging Analysis of Bearing Samples
-
XPS and ToF-SIMS Analysis of Silicone Contamination on Connector
Pins for Engine Management Modules.
-
Analysis of Three Electrocoat Panels Using ToF-SIMS
-
AES/ToF-SIMS Analysis of Aluminium Wire to Contact Pin Bond Failure
on an Engine Management System Electronics Module.
-
Investigation into the Composition of Contaminants Harvested from
Parked Vehicles
-
Analysis of Camshafts and Followers
-
DSIMS Analysis of Eight Bearing Section Samples
-
DSIMS Analysis of One Bearing Section
-
DSIMS analysis of Three Bearing Section Samples
-
ToF-SIMS Investigation into the Delamination of Automotive Paint
on an ABS Component
-
Surface Analysis of a Paint Delamination Failure of an Interior
Instrument Panel using XPS and ToF-SIMS
-
DSIMS analysis of Two Bearing Samples
-
SIMS Depth Profile Analysis of One Bearing Section
-
XRD Analysis of the Al / Cu Layer on Five Bearing Samples
-
DSIMS Analysis of Bearing Samples for Boron, Titanium and Silicon
-
DSIMS Analysis of Delaminated Bearing Samples
-
ToF-SIMS Analysis of Craters on a Painted Fuel Filler Cap
-
Analysis of Organic Contamination on Aluminium Bond Pads using
ToF-SIMS
-
DSIMS Analysis of Competitor Bearing Samples.
-
XPS Analysis of Alloy Batteries
-
DSIMS Analysis of Two Bearing samples
-
An XPS Characterisation of Surface Oxidation on Rubber Engine
Mounts from an Accelerated Test Procedure.
-
AES and DSIMS Depth Profiling Analysis of Brown Staining on a
Wear Tested Roller Bearing.
-
An Investigation into the Cause of Paint Disbondment
-
An Investigation into Staining on Steel Bearings using X-ray Photoelectron
Spectroscopy.
-
XPS Study of the Correlation of Electrical Properties of Batteries
with Surface Chemistry
-
DSIMS Analysis of Bearing Coatings
-
Determination of Surface Composition and Depth of Oxidation on
a Used Automotive Engine Mount
-
XPS Investigation of Wear Films Formed in a Mild Steel Shaft /
PTFE Loaded Polyketone Bearing System
-
An XPS Investigation of Near Surface Oxidation of Rubber Engine
Mounts after Brake Fluid and Fuel Exposure.
-
Characterisation of the Surfaces of Unused PTFE Seal Discs using
Laser Profilometry
-
ToF-SIMS Investigation of the Cause of Reduced Adhesion Between
a Moulded Component and a Foam Substrate
-
ToF-SIMS and XPS Analysis of a Gasket Coating
-
SIMS Analysis of Stain Areas on Bearing Samples
-
SIMS Analysis of a Piston Section
-
An XPS Investigation of Possible Degradation of Rubber Engine
Mounts after Brake Fluid and Fuel Exposure.
-
DSIMS Analysis of Bearing Samples
-
XPS Analysis of Discolouration on Dashboard Veneers.
-
DSIMS Analysis of Bearing Samples for Intermetallic Formation
-
Profilometry of Elastomeric Seals and Control Shaft Surfaces for
Automotive Components
-
Analysis of Flex Film Connectors and Associated PCB Specimens
using ToF-SIMS and XPS
-
Dynamic SIMS Depth Profiling of Two Bearing Samples
-
Analysis of Suspect De-Foamer Specimens using ToF-SIMS
-
An XPS Investigation of the Locus of Failure of a Wishbone Suspension
Part
-
Surface and Depth Profiling Analysis of Bearing Samples
-
An XPS Investigation of the Cause of Poor Paint Adhesion on Bumper
Ears
-
XPS Analysis of Residues on Piston Skirts After Various Cleaning
Treatments. Part 2.
-
SIMS Depth Profiling of the NiCr / CuPbSn Interface on a Bearing
Section.
-
An XPS Study of a Brown Deposit Extracted from Galvanised Sheet
Ductwork in a Water-based Paint System
-
Analysis of Paint Craters using ToF-SIMS
-
Analysis of an Automotive Paint Crater by ToFSIMS
-
Surface Analysis of Paint Crater Specimens using Small Spot XPS
-
An SEM/EDX Analysis of Speciality Coatings on Tungsten Carbide.
-
An XPS Investigation of Internal Oxidation in Rubber Bush Engine
Mountings.
-
Analysis of PU Foam/Face Fabric Interfaces using ToF-SIMS and
SEM
-
Analysis of a Non-Wetting Automotive Basecoat using ToF-SIMS
-
Analysis of Brassed Steel Cords using XPS, Imaging SIMS, DSIMS
and ToF-SIMS
-
An Investigation of Poor Paint Adhesion on Moulded Car parts
-
An XPS and ToF-SIMS Study of Seal Disbondment in Rear Quarterlight
Windows for Automobiles.
-
Analysis of Painted Panels with “Dish” Defects using
X-ray Photoelectron Spectroscopy (XPS).
-
A Surface Analysis Study of Automotive Coatings using ToF-SIMS
-
Surface Analysis of Automotive Paint Craters by XPS
-
Analysis of Water-Based Paints using ToF-SIMS
-
Comparative Analysis of Two Pairs of Water Based Paint Systems
using GC-MS
-
A LIMA and XPS study of shallow crater defects in clear-coat lacquered
paint finishes.
-
LIMA analysis of a spot defect in a red painted car body panel.
-
Analysis of Hosing used for Automotive Paint Spraying, using X-ray
Photoelectron Spectroscopy (XPS)
-
A Surface Analysis Study of Automotive Refinish Samples using
ToF-SIMS
-
XPS Depth Profiling Analysis of Coated Steel Bearings
- A LIMA investigation of defect formation on
the tailgate panel
-
A Surface Analysis Study of Automotive Refinish Samples using
XPS and ToF-SIMS
-
A LIMA/XPS investigation of coating disbondment at the edges of
roof rack castings
-
Analysis of Craters in Automotive Coatings by ToF-SIMS
-
Further Investigation into Coating Failure on an Engine Cylinder
Bore using ToF-SIMS
-
Surface Analysis of Automotive Paint Surfaces showing Matt and
Gloss Finishes using XPS and ToF-SIMS
-
Further Studies into the Variable Adhesion of Metal Shims to Painted
back Plates of Brake Pads using XPS.
|
|
 |
 |
Next Steps |
 |
|
|
|
|